Essay, 18 pages (4500 words)

Grand challenges in glass science

Subject: Health & Medicine

Info

Published: December 15, 2021
Updated: July 20, 2022
University / College: University of Pittsburgh
Language: English
Downloads: 37

Table of Contents

Introduction
Glass Physics
Glass Chemistry
Glass Engineering Technology
Pioneering the Possibilities of Glass
Conflict of Interest Statement
Acknowledgments
References

Introduction

Glass science offers researchers an ample range of open questions, starting from one of the most difficult problems in science: the basic nature of the glassy state.

Atomic-level descriptions of the glassy state are extremely complex due to the lack of long-range order found in crystalline materials. Our understanding of fundamental glass physics and chemistry is also hindered by the non-equilibrium thermodynamic state of glass. Recent theoretical and experimental advances are enabling the field to mature from an empirical discipline to one built upon rigorous scientific principles. These advancements not only offer a remarkable level of understanding but also contribute to the atomic-level design of novel functional glasses ( Mauro et al., 2013a ).

Glass science combines the cutting edge of a multitude of technical subjects: physics, chemistry, geology, engineering, and mathematics. Glass transition and relaxation phenomena are at the frontiers of condensed matter and statistical physics. From a chemical perspective, a nearly infinite combination of compositions can lead to successful glass formation. To facilitate progress at a large scale and exploit all of the unique properties that glasses may offer, the boundaries of glass engineering technology must also be pushed forward.

Recent advances of the domain have coincided with an unprecedented demand for glass as a high-tech material in consumer electronic devices. Working in the field of glass has never been more stimulating – glass plays a critical role in solving several of the global energy and healthcare challenges of today.

Glass Physics

Glass is in a state of thermodynamic disequilibrium and is continually relaxing toward a stable or metastable liquid phase, a transition reported to be one of the most intriguing problems in physics ( Ediger et al., 1996 ; Phillips, 1996 ; Debenedetti and Stillinger, 2001 ; Dyre, 2006 ; Mauro et al., 2008 ). Glass transition and relaxation effects play a vital role in determining the property evolution of all glass compositions. While significant progress has been made in understanding glass transition and relaxation phenomena, key aspects, e. g., the structural origins of particular relaxation modes in glass and the interrelationships among the various relaxation modes, remain to be described, in addition to the relationship between structural relaxation and stress relaxation and the origin of low temperature relaxation modes ( Welch et al., 2013 ).

We gain insight into glass transition and relaxation through statistical modeling ( Mauro, 2013 ; Mauro and Smedskjaer, 2014 ), which can capture both the non-equilibrium and non-ergodic aspects of the glassy state. However, we still need to connect detailed statistical approaches to simplified thermodynamic ones properly accounting for the out-of-equilibrium character of the system. The traditional concept of fictive temperature distributions has shown to be generally invalid; except for the special case of a discontinuous glass transition ( Mauro et al., 2009a ).

The composition dependence of several glass properties can be predicted using the topological constraint theory ( Boolchand et al., 2005 ; Micoulaut and Phillips, 2007 ; Mauro, 2011 ; Bauchy et al., 2013 ), capturing key physics governing the glassy state without irrelevant details. The theory has already been used in the design of new commercial glass compositions ( Smedskjaer et al., 2010 , 2011 ; Mauro et al., 2013a ). It needs to be extended though to new glass composition families and to calculate additional properties.

A particularly challenging glass and glass-forming liquid characteristic is viscosity since it varies by orders of magnitude with temperature and is highly sensitive to thermal history ( Mauro et al., 2009b , c ). Recent progress built upon topological constraint theory has improved descriptions of both the thermal and compositional effects on viscosity ( Mauro et al., 2013b ). However, more detailed investigations are required to understand the role of fragility ( Angell, 1991 ), i. e., the steepness of the viscosity curve at the glass transition, in governing relaxation behavior and other properties such as diffusion, as well as the structural origin of the fragile-to-strong transition ( Zhang et al., 2010 ) and any associated liquid–liquid critical point ( Lascaris et al., 2014 ).

The connection between fragility and the kinetics of nucleation and crystal growth in glass and glass-forming liquids ( Fokin et al., 2010 ) is still poorly understood from the perspective of fundamental physical models. The thermodynamics of crystallization are also of critical concern, as quantified by the liquidus temperature of the system ( Wallenberger and Smrcek, 2010 ). Liquidus temperature and phase equilibrium diagrams are of vital importance for all aspects of glass formation; however, there is currently no predictive model derived from fundamental physical considerations.

Glassy materials have always been prized for their favorable optical properties ( Li et al., 2010 ; Ballato and Dragic, 2013 ). While Maxwell’s equations for electrodynamics are well understood, many challenges remain related to the origin of particular optical, electrical, and magnetic properties of glassy materials, such as glass structural effects on Brillouin scattering and photoelasticity ( Guignard et al., 2007 ).

Additional research is also required to address the detailed origins of thermal properties such as heat capacity ( Yue, 2008 ) and thermal expansion coefficient ( Potuzak et al., 2010 ). Thermal conductivity ( Yu and Freeman, 1987 ) and acoustic properties ( Rufflé et al., 2006 ) of glass represent largely unexplored territories, both ripe for new research efforts.

Glass Chemistry

The lack of crystallinity in glass means that stoichiometric requirements of crystalline solids need no longer be satisfied. As a result, glass compositions are infinitely tunable in chemistry, opening the possibilities for uniquely refined combinations of properties ( Varshneya, 2006 ). When designing new glass compositions, nearly the whole periodic table is available to serve as the palette of possible ingredients.

Silicates are certainly the most prominent glasses, both as naturally occurring geological systems and as manmade glass products. Despite their ubiquity, silicate glasses have complex structures ( Mysen and Richet, 2005 ; Zheng et al., 2012 ) that are still only partially understood. Improvements in our understanding of structure-property relationships as a function of silicate glass chemistry will be of great value in the design and discovery of new industrial glasses ( Mauro et al., 2014 ).

Other oxides such as borates ( Kamitsos and Chryssikos, 1991 ) and phosphates ( Brow, 2000 ) offer both interesting scientific challenges and promising technological opportunities beyond silicates. Unique effects can obtained when incorporating these other network-forming oxides into a silicate glass matrix ( Greaves and Sen, 2007 ; Hubert and Faber, 2014 ), which provides a further area for future investigation.

Research in non-oxide glasses, such as bulk metallic and chalcogenide glasses, has exploded in recent decades ( Boolchand et al., 2001 , 2005 ; Greer and Ma, 2007 ; Schroers, 2013 ). Metallic glasses offer fascinating properties such as a brittle-to-ductile transition yielding a dramatically increased fracture toughness ( Chen, 1976 ). Chalcogenide glasses are particularly interesting for their unique optical properties for infrared optics and photonics ( Zakery and Elliott, 2003 ). These composition families have challenged the traditional notion of what constitutes a glass, inspiring the research community to think more broadly about the possibilities of completely new glass chemistries.

Glass-ceramics ( Zanotto, 2010 , 2013 ; Höland and Beall, 2012 ), i. e., glasses with embedded crystallites formed through controlled nucleation and crystal growth, are an important research area as well. Their properties are not only dependent on glass and crystallite chemistry but also on the morphology and the distribution of the crystallites. Glass-ceramics can exhibit both high strength and toughness, often with low coefficients of thermal expansion. Researchers aim to achieve glass-ceramics having both high toughness and a high degree of transparency ( Pinckney, 1999 ).

Polyamorphism ( Huang et al., 2004 ; McMillan, 2004 ) is a recently discovered phenomenon: two glasses of identical chemistries may display markedly different short-range structural ordering, which leads to large differences in observed properties. The glass community is still at the initial stages of investigating which glass chemistries may exhibit this intriguing effect.

While most attention in the glass research community is on bulk glass structure and properties, whose modeling already poses special challenges due to the broad spatial and time scales to obtain sufficient statistics needed for accurate calculation of glass structure and properties, glass surfaces present distinct questions to answer. Bulk glass chemistry is not generally transferable to its surface ( Pantano et al., 1975 ).

Finally, the chemical durability of glass is of great concern for such diverse application areas as nuclear waste storage, pharmaceutical glass labware, and glasses for long-term outdoor applications in photovoltaics, architecture, and the automotive industry; hence, there is an urgent need to develop a rigorous fundamental understanding of the thermodynamics and kinetics of the chemical durability of glass ( Conradt, 2007 ).

Glass Engineering Technology

Glass forming process technology has proven to provide several of the most significant breakthroughs in the field ( Pilkington, 1969 ; Graham and Shuldiner, 2001 ; Varshneya, 2006 ). It is, therefore, essential to treat advances in glass engineering technology on an equal footing as advances in glass science.

The ribbon machine was crucial for mass production of glass envelopes for incandescent light bulbs, enabling affordable electrical lighting across the globe. The development and fine-tuning of the outside vapor deposition was essential for the invention of low-loss glass fibers for optical communications, which directly led to the invention of the Internet and brought society into the Information Age. The Pilkington float process enabled the production of large, flat, high-quality, low-cost glass sheets for modern homes and skyscrapers. Finally, the fusion draw process has led to the development of high-precision, ultra-thin specialty glass substrates for flat panel displays ( Ellison and Cornejo, 2010 ).

The detailed chemistry of glass melting and fining is still a topic of great interest ( Beerkens, 2001 ); entirely new approaches could offer dramatic benefits for large-scale glass production ( Watanabe et al., 2010 ). Chemical interactions between molten glass and the refractory materials during melting and forming are also critically important. The community needs to better understand volatilization and condensation reactions during glass production. Homogenization of the glass during melting is a complicated process, but essential for obtaining desired properties ( Bhosle et al., 2012 ).

Another intriguing possibility is the formation of glass under high pressure ( Wondraczek and Mauro, 2009 ; Youngman, 2014 ). This occurs in volcanic and magmatic systems; however, current glass production is normally performed at ambient pressure. Application of high pressure can continuously alter the state of the glass, providing unique combinations of properties not accessible by adjusting thermal history alone.

Pioneering the Possibilities of Glass

The pace of innovation in glass science has increased enormously in recent decades ( Mauro and Zanotto, 2014 ) due to the advances in our fundamental knowledge of glass physics and chemistry ( Wondraczek and Mauro, 2009 ). Further emphasis on fundamentals will be key in laying the groundwork for the next wave of innovation in glass as a highly engineered material for addressing some of the greatest challenges facing the world today.

From glass windows to glass lenses in telescopes and microscopes, new developments in glass science and technology have been key enablers of modern civilization throughout history. This societal impact has not diminished; the use of glasses for liquid crystal display panels and damage-resistant protective covers has transformed the way in which humans interact with computing devices ( Ellison and Cornejo, 2010 ).

A glass’s resistance to breakage is key for a large number of practical applications. High-strength glasses are available ( Varshneya, 2010 ; Wondraczek et al., 2011 ); however, even with chemical strengthening, they are still below the theoretical strength aimed for in defect-free conditions ( Mattos, 2013 ). To approach the theoretical limit, understanding crack formation ( Wiederhorn et al., 2013 ) and fracture behavior ( Quinn, 2012 ; Bouchaud, 2013 ) is necessary. Further research should also aim to improve the ductility and fracture toughness of glass ( Shi et al., 2014 ), which are intimately connected to the Poisson’s ratio of the material ( Greaves et al., 2011 ).

Glasses have also found novel applications in healthcare ( Hench and Thompson, 2010 ; Hench et al., 2010 ; Fu et al., 2011 ; Jones and Clare, 2012 ). Bioactive glasses and glass-ceramics are now commonly used in the dental community and can also be used to promote bone regeneration. A new generation of borate glass fibers has demonstrated effective healing of soft tissue ( Rahaman et al., 2011 ). Radioactive glass microspheres have contributed to the fight against cancer ( White and Day, 1994 ). An anti-microbial cover glass has recently been developed to suppress the spread of infectious diseases ( Kosik Williams et al., 2014 ). The next generation of bioactive glassy materials may play a role in stem cell engineering ( Hench and Thompson, 2010 ) by the activation of specific genes within living cells.

The demand for internet communication bandwidth continues to rise; optical interconnects made of glass and other glass-based photonic devices will be essential for controlling the flow of information in the next generation of information technology ( Richardson et al., 2010 ; Li et al., 2014 ).

Glass will also play a crucial role in solving many of our challenges related to energy and the environment. Glass is already a key component in photovoltaics and other systems for solar energy conversion ( Deubener et al., 2009 ). Glass components will also be critical for enabling new sustainable energy sources and facilitating access to clean air and water ( Brow and Schmitt, 2009 ). Glass is also essential for the safe storage of radioactive waste materials from nuclear power generation ( Jantzen et al., 2010 ).

For those inspired to learn more about this material of the future that continues to pose challenges to basic research and enables an unprecedented technological advancement, we recommend to continue reading the upcoming articles in the Glass Science specialty of Frontiers in Materials, as well as other recent reviews on the topic ( Bange and Weissenberger-Eibl, 2010 ; Hench, 2011 ; Mauro and Zanotto, 2014 ; Mauro et al., 2014 ).

Conflict of Interest Statement

The author declares that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Acknowledgments

I am grateful for many valuable discussions on the future of glass science with L. David Pye of Alfred University, Edgar D. Zanotto of the Federal University of São Carlos, and Michael S. Pambianchi, Daniel J. Vaughn, Adam J. Ellison, Douglas C. Allan, Jeffrey T. Kohli, Jean-Jacques Theron, Monique Comte, M. K. Badrinarayan, Gary S. Calabrese, and David L. Morse of Corning Incorporated. I am also thankful for many valuable conversations with participants at the Corning Glass Summit, held on June 12–13, 2014, in Corning, NY, USA.

References

Angell, C. A. (1991). Relaxation in liquids, polymers and plastic crystals – strong/fragile patterns and problems. J. Non Cryst. Solids 13, 13–31. doi: 10. 1016/0022-3093(91)90266-9